Way to Fix Error Code 0xc000000e winload.exe in Windows 10

Windows 10

Are you detecting Error Code 0xc000000e winload.exe on Windows 10? is this issues always displays when you try to boot up the system? Is this error occurs due to faulty and invalid BCD? If all your queries are positive then you are landed at right place. Here we will provide you the complete details about the error code and also provide you the best manual steps to fix this issues. Read this article carefully and follow the instruction given below.

Error Code 0xc000000e winload.exe generally appears when you try to boot up your Windows 10 system. It is presented with the black screen that provides you the instruction to repair the computer using a disk installation or a drive recovery. The issues with the BCD usually happen because of Power shortage, malicious malware and virus infection, error while Configuring BCD, and others. Mostly, file integrity issue occurs when you forcibly shut down your system when it is in the midway of recording important data in the boot section. Therefore, in order to resolve the Error Code 0xc000000e winload.exe in Windows 10, you must have to access the advanced settings and then make fixes Out.

How to repair Error Code 0xc000000e winload.exe in Windows 10

Here are some steps to troubleshoot the Error Code 0xc000000e winload.exe in Windows 10. follow the instruction:

Rebuild Boot Configuration Data

Typically, the Boot Configuration Data (BCD) define the procedure of the Windows Boot. Therefore, when we encounter an Error Code 0xc000000e winload.exe in Windows 10, you need to repair it. So, it is highly advised to run the following steps to solve this BSOD problem.

  • Step 1: First of all, insert the Windows 10 boot installation media into the port, and then restart Windows 10 PC.
  • Step 2: Also, press the function key such as F2, F8, F12, F10, Esc, Delete, or Backspace depending on the manufacturer of your computer.
  • Step 3: Then click the Next button when the Windows screen Setup prompts up. Select the language you want and click Next.
  • Step 4: Now click on the “Repair your computer” option in the lower left button. Then, on the next screen, click the “Troubleshoot” button.
  • Step 5: Select “Advanced Options.”
  • Step 6: Finally, in the list of options, select Command Prompt. Now you can run Windows 10 boot recovery commands. So, type or copy-paste the commands are given below and press Enter after each command is inserted.

bootrec /scanos

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

NOTE: if the above-mentioned commands can be executed then type these following command and then press the Enter Key at the end of the Commands:

bcdedit /export C:\BCD_Backup

c:

cd boot

attrib bcd -s –h -r

ren c:\boot\bcd bcd.old

bootrec /RebuildBcd

After running the command successfully in safe mode, exit and then restarts the system. Hopefully, your system boots up correctly without displaying any error code.

It is also done by Automatic Repair

In most of the cases, performing inbuilt automatic repair can troubleshoot the issue related to the Boot section. Therefore, here we will provide you with some steps to access the Automatic repair from install disc that can solve your Boot Related Issue. Kindly follow these steps given below:

  • Insert installation disk of “Windows 10” DVD or USB Media and finally restart the PC. When it asks to press any key then press any key to continue the further process.
  • Select your preferred language and then click on “Repair Your Computer” which is displayed at the bottom of left of the Computer screen.
  • Click on Troubleshoot
  • Select Advanced option on next troubleshoot screen.
  • After that press “Automatic repair” to solve the issues related to the Boot section that does not allow the Windows system to Load Properly. And finally, reboot the system and see whether the Error Code 0xc000000e winload.exe continue to occur or not.

If you don’t want to troubleshoot this error using DVD or CD then it is also possible to fix 0xc000000e without CD and DVD. You just try other repairing process which is mentioned below.

Repair OS with the Recovery Drive

Damaged and missing system files may also be responsible for detecting the 0xc000000e error code on a Windows-based PC. These commands will repair damaged OS files using the command prompt of the “Recovery Disk”.

  • Similar to the above survey method, first, access the Advanced options and Choose the Command Prompt.
  • Now, Type or Copy-Paste the below-given command and press Enter after inserting each command to continue the further process.

cd x:\sources\recovery

StartRep.exe

This StartRep.exe Utility command fixes the boot environment value and Repair the BCD error. However, in some cases, it may not work with one attempt, so you need to repeat this command several times.

Now, if the above-Mentioned commands cannot solve the problem, you should know the values for the Windows Boot Manager. So, type bcdedit in the Command Prompt and know the value.

Here, note the value of the device. If values are unknown then run these commands and press Enter after each one.

bcedit /set {DEFAULT.EN_US} device partition=c:

bcedit /set {DEFAULT.EN_US} osdevice partition=c:

bcedit /set {BOOTMGR.EN_US} device partition=c:

Note. You need to replace C: in the above command, if the letter of the operating system is different.

After successfully launching the “command prompt” and remove the recovery disc. Restart your PC and check the 0xc000000e winload.exe error code solved or not.

Hope this method will help you overcome the error code 0xc000000e in All version of the Windows operating system such as Windows 7, Windows 8, and other.

Besides this, there are also various techniques to repair Error Code 0xc000000e winload.exe on Windows 10. let’s take a look at them:

  • Perform SFC and CHKDSK Scan: if the system is unable to bypass this error then there may be a certain hardware related issue on the system. So, run CHKDSK and SFC Built-in Commands If any file integrity of the hardware is compromised.
  • Repair Windows Image: this troubleshooting process is also done by detecting and repairing the windows image. You shout run the DISM command with /RestoreHealth Switch.
  • Clean install Windows: if you are sure that your Hard Disk Drive is working correctly then its time to clean the install Windows on your system. By doing this, you will surely delete all the stored data of the drive on which the current operating system loaded. After that, just install the new operating system on the same drive and so that the data stored on the drive are safe and secure.

Leave a Reply

Your email address will not be published. Required fields are marked *